Browse Heat Transfers! Browse Zombie Transfers Gun Control Transfers Inkjet/Laser Transfer Paper Printable Mousepads Browse Printed T-Shirts Custom Transfer Price List Custom Buttons! Pressing Instructions
Browse Categories

Transfer and Pressing information

Important Note: Springhill's transfers are designed for use with commercial-grade clamshell heat presses.
They're not usable with home or hand irons!

Standard transfer sizes:

Adult: 11x13, Jumbo: 13x15, Youth: 8x10

Hot Split Transfer Pressing Instructions

Use these settings for best results when pressing our hot-split transfers:

Temperature: 375ºF

PREHEAT YOUR GARMENT FOR 5 - 8 SECONDS TO REMOVE EXCESS MOISTURE.
IF YOU DO NOT PREHEAT YOUR GARMENT, THE TRANSFER MAY NOT PEEL PROPERLY.

Manual presses require heavy pressure. Tighten the press as much as possible.

Air driven presses set at 55 to 60lbs.

Time: 8-10 seconds, peel hot.

IT IS NORMAL FOR INK TO BE LEFT ON THE PAPER WITH HOT SPLIT TRANSFERS.

(To improve opacity on dark shirts, try less time.)


PERFECTPEEL TRANSFER PRESSING INSTRUCTIONS:

Press Temperature: 375ºF


PREHEAT YOUR GARMENT FOR 5 - 8 SECONDS TO REMOVE EXCESS MOISTURE.

IF YOU DO NOT PREHEAT YOUR GARMENT, THE TRANSFER MAY NOT ADHERE PROPERLY AFTER WASHING.

Manual presses require heavy pressure. Tighten the press as much as possible.

Air driven presses set at 55 to 60lbs.

Time: 8-10 seconds, peel hot.

Cold Peel Glitter Transfer Pressing Instructions

Temperature: 375ºF
Medium Pressure (55 lbs.)
Time: 7-10 seconds. Cool completely! Peel COLD!

Instructions for "Wrap-Around" Style Transfers

This 4-step process does not leave a line or gap in the design, and is easy to do!

1.

Place t-shirt so the left edge of the shirt is
at the left edge of the platen.
Leave about 1" of the platen visible.

2.

Place the transfer on the shirt so its
center is aligned with the tag.

3.

Press first part of design normally, peel while hot.
DO NOT peel all the way.
Leave 3-4" of transfer attached to the shirt.
Excess ink will wipe from platen easily.

4.

Slide shirt to the left with transfer still attached.
The right edge of shirt should be
at the right edge of the platen.
Leave 1" of platen visible.
Press remainder and peel hot.