Browse Heat Transfers! Browse Zombie Transfers Gun Control Transfers Inkjet/Laser Transfer Paper Printable Mousepads Browse Printed T-Shirts Custom Transfer Price List Custom Buttons! Pressing Instructions
Browse Categories

Photo-Perfect Inkjet Transfer Paper (8.5 x 11)

<< Previous in Inkjet/Laser Transfer Paper Next in Inkjet/Laser Transfer Paper >>

List Price: From $45.00 to $80.00

Product Options

Number Of Sheets:
Make your own high-quality color transfers at an affordable price with your color laser copier or ink-jet printer! Our papers can be applied to T-shirts and sweatshirts, mouse pads, caps, puzzles, canvas bags and more!

BACK IN STOCK

Inkjet Transfer Paper

Printing Instructions:

This paper is to be used with an Inkjet Printer.

Please follow all directions carefully for best results.

SPECIAL NOTE:

There are many different types of inkjet printers on the market, and new ones are being introduced every day. Not all inks are created equal! While our inkjet paper works in MOST inkjet printers, there is no guaranty that the inks will be colorfast (we recommend using OEM's or pigmented inks whenever possible, as there are many inferior inks on the market). We highly suggest that you test your inks (wash test) prior to producing multiple transfers to ensure that the ink does not run.

Printing:

If printing a photograph:

1. In print options, select Photo paper as your paper type and turn the mirror image option on.

2. Set the printing mode to photograph if necessary.

3. Print in either 360dpi or 720dpi mode (do not print at higher than 720 dpi).

DO NOT OVERSATURATE COLORS. IT WILL NOT ENHANCE THE TRANSFER COLOR & IT WILL ULTIMATELY CAUSE BLEEDING BECAUSE OF EXCESSIVE DYE LAID DOWN. A LITTLE COLOR WILL GO A LONG WAY!

4. After printing transfer with the Inkjet printer, allow the transfer to dry thoroughly (we suggest 15 minutes to 1 hour).
COLOR MAY SEEM DULL BUT WILL INTENSIFY WHEN APPLIED!

If printing a
flat color design (spot colors) such as Text or Block graphics:

1. In print options, select plain paper as your paper type and turn the mirror image option on.

2. Set the printing mode to graphics or text style of printing.

3. Print in either 360dpi or 720dpi mode (do not print at higher than 720 dpi).

DO NOT OVERSATURATE COLORS. IT WILL NOT ENHANCE THE TRANSFER COLOR & IT WILL ULTIMATELY CAUSE BLEEDING BECAUSE OF EXCESSIVE DYE LAID DOWN. A LITTLE COLOR WILL GO A LONG WAY!

4. After printing transfer with the Inkjet printer, allow the transfer to dry thoroughly (we suggest 15 minutes to

1 hour). COLOR MAY SEEM DULL BUT WILL INTENSIFY WITH TRANSFER!


Transferring Instructions:

TIPS:

If shirt is 100% cotton, it will have the tendency to absorb excessive moisture. This can lead to bleeding problems. To avoid this, it is best to pre-heat T-shirt until all the steam is out. It is always best to wash shirt before wearing.

COMMERCIAL INSTRUCTIONS - FOR USE WITH A HEAT PRESS MACHINE:

Hot Peel Instructions:

1. After the image has dried from printing, approximately 15 minutes to 1 hour, cut the image leaving a 1/8” border around the image.

2. Press the image at 350°- 360° F for 16 seconds with the heat press, using moderate pressure.

3. Quickly peel the transfer starting at the corner. USE CAUTION, PAPER WILL BE HOT.

HOME USE INSTRUCTIONS - FOR USE WITH A HOME IRON:

Hot Peel Instructions:

1. After the image is dry from printing, approximately 15 minutes to 1 hour, cut the image leaving a border of 1/8” around the image.

2. Set the iron to the hottest temperature and do not add water to the iron. When ironing on to a T-shirt, double fold the shirt so that the area that the image will be transferred to is facing upward. Iron the area for a few seconds without the transfer paper over a hard surface, not an ironing board.

3. Place the image face down onto the fabric. Iron the back of the image for a few seconds and let cool for

about 10 seconds. Iron the perimeter of the image first, starting at the lower left corner and moving upward

along the side to the top left corner. Next, iron the top center of the image moving slowly to the bottom

center of the image. Re-iron the image VERY SLOWLY using medium to high pressure. Continue

ironing until you have completely traced the sides of the image. This entire process should take about 60-

70 seconds for an 8”x 10” image surface. Follow-up by ironing the whole image quickly, heating all of

the transfer paper again for approximately 10-13 seconds.

4. Quickly peel the transfer starting at the corner immediately after the ironing process. USE CAUTION,

PAPER WILL BE HOT.

Washing Instructions:

Wash inside out in COLD WATER. DO NOT USE BLEACH. Place into the dryer IMMEDIATELY and do not hang to dry. Do not iron the shirt’s image surface again. It is always best to wash shirt before wearing it.

We appreciate your business!